Very high performance diaphragm valve designed to be mounted directly into the compressed air manifold. 1" and 1.5" models are supplied with outlet pipes to length specified, 3" and 3.5”models are supplied without outlet pipes.

Suitable for

Dust collector applications, in particular for reverse pulse jet filter cleaning including bag filters, cartridge filters, envelope filters, ceramic filters, and sintered metal fibre filters.

Construction

Body and Dresser Nuts: Diecast Aluminium
Ferrule: 304 SS
Armature: 430FR SS
Diaphragm and Seals: Nitrile or Viton (reinforced)
Spring: 304 SS
Screws: 302 SS
Outlet Pipe: Schedule 40 wrought steel zinc passivated
Diaphragm Seat: PA-6 (25 & 40MM (76MM standard), or Viton coated mild steel (all sizes) Refer to Q Series Solenoid product data sheet for solenoid construction details.

Operation

Recommended Recommended on time range: 50-500ms
Recommended time between pulses: 1 minute or greater

Maintenance

Before conducting any maintenance activity on the system ensure that components are fully isolated from pressure and power supplies. Pressure and power should not be reapplied until the valve has been fully assembled. Diaphragm and pilot inspection should be conducted annually.